GBR Hot Tack Tester

Product Introduction

GBR hot tack tester tests the sticking strength of packaging films after being heat sealed with different temperatures, pressures and times. It simulates the use of packaging bags and performs impact experiments by hot tack.

Test Principle

Align and overlap two test samples and clip one end in clips. The two samples are each spread over the upper side and lower side of the impact bar, and pass through the hot tack entrance. The heat sealed samples are then pulled quickly to the impact bar, and forced off by the impact bar. The force value is the measuring value (unit: N).

 

Application

Plastic Film - Suitable for food, medicine, various types of composite films and other soft packages

Medical Nonwovens - Medical device packaging

 

Features

- P.I.D control system with high accuracy.

- Upper and lower heat seal bars can set different temperatures.

- LCD display, convenient and easy to use.

- Built-in printer which can print out reports.

- Customisable size, shape and smoothness of heat seal bar.

 

Standards

ASTM F1921, ASTM F2029, GB/T 34445, QB/T 2358, YBB00122003

 

Specifications

Item Technical Parameters
Test Range 0 - 50N (customisable)
Temperature Range Room temperature ~ 250°C
Measurement Accuracy Level 0.5
Heat Sealing Pressure 0.1MPa~0.8MPa
Heat Seal Dwell Time 0~99s
Instrument Size 310 x 500 x 680mm
Power Supply 220V 50Hz / 500W
Net Weight 15KG
Cooling Time User Setting

 

Downloads

GBR Hot Tack Tester Brochure
PDF – 250.6 KB


Get in touch to discuss your requirements