GBM-D1 Intelligent Sealing Performance Tester
Product Introduction
GBM-D1 intelligent sealing performance tester uses the working principle of pressurising the sample to test the sealing strength and integrity of packaging materials. It is suitable for food and medicine packaging materials such as flexible, rigid, porous and laminated aluminium foil. There are multiple test modes for comprehensive evaluation of the tightness and integrity of packaging materials.
Monitoring the seal integrity of packaging is critical in many industries, such as, in the medical industry, to maintain product sterility, in the pharmaceutical industry, to meet standards and protect product effectiveness and in the food industry, to ensure food safety and freshness.
Test principle
The sample is subjected to a detrimental air pressurisation method (pressurisation to blasting or pressurisation to a specified pressure) to test the sealing performance of the package. The test methods can be carried out according to different standards. The test results can be expressed in the form of a combination of test pressure, holding time, test package location, leak location, etc.
Test methods
- Burst test: The instrument continuously increases the pressure on the package until the package bursts. (Comply with ASTM F1140, ASTM F2054, YY/T 0681.3, YY/T 0681.9 standards).
- Leakage test: After inflating the package to reach a pre-set pressure, and maintain the pressure for the required test time, carry out pressure management and leakage test according to the standard. Able to choose the test conditions of unconstrained or limited plate. (Compliant with ASTM F2095, ISO 11607-1 standards).
- Creep test: A constant pressure is generated in the package, close to the burst limit, and maintained for a certain period of time, and the sealing performance is evaluated when subjected to pressure within a set time. Optional test modes: creep and creep to failure (according to ASTMF1140, YY/T 0681.3 standards).
- Bubble test: put the package in water, then pressurise the package to a predetermined pressure, and maintain the predetermined pressure for a predetermined time (in accordance with ASTM F2096, YY/T 0681.5 standards).
Standards
- ASTM F1140 Blasting and Creep of Flexible Barrier Packaging (Unrestrained)
- ASTM F2054 Rupture Test (with Limiting Plate)
- ASTM F2095 pressure decay leak test (unrestrained or with restrained plate)
- ASTM F2096 Bubble Leak Test (with water tank)
- ISO 11607 Packaging for Terminally Sterilised Medical Devices
- YY/T 0681.3 Test methods for packaging of sterile medical devices - Part 3: Resistance to internal pressure damage of unconstrained packaging
- YY/T 0681.5 Test methods for packaging of sterile medical devices - Part 5: Detection of gross leakage by internal pressure method (bubble method)
- YY/T 0681.9 Test methods for packaging of sterile medical devices - Part 9: Seal burst test of flexible packaging by internal air pressure method of restraint plate
- GB/T 17876 Packaging Containers Plastic Anti-theft Bottle Caps
Specifications
Item | Technical Parameters |
---|---|
Testing Time | 1 ~ 1000 s |
Test Range | 0.1 ~ 1000 KPa |
Resolution | 0.1 KPa |
Test Accuracy | ±0.5%FS |
Specifications and Weights | 400*415*272 mm(L x W x H), less than 5 kg |
Test Type | Burst, leak, creep, bubble method |
Type of Packaging | Soft package, semi-plastic package, all-plastic package |
Air Pressure | 0.5 MPa ~ 0.9 MPa |
Power Supply | 220 V, 50 Hz |
Power | 150W |
Basic Applications
Platic Composite Bag | It is suitable for the pressure rupture test of various plastic films, aluminium films, paper-plastic composites, aluminium-plastic composites and other packaging bags. |
Hose Test | It is suitable for packaging hoses of various cleaning products and other fields. The hose can include toothpaste tubes, facial cleanser, cosmetics, various medicinal ointment tubes, food packaging tubes, etc. |
Creep Test | Applicable to the creep performance test of various packaging bags, boxes, etc. |
Creep to Rupture | Suitable for performance testing from creep to rupture of various packaging bags, boxes, etc. |
Other Applications
Blister Pack Burst Test | Suitable for pressure test of various blister packs. |
Aerosol Valve Test | It is suitable for testing the sealing performance of various aerosol valves. Aerosol valves include various insecticides, mousses, jelly water, medicinal sprays, self-spray paints, etc. |
Three-sided Heat-sealing Material | It is suitable for the pressure test where only three sides of the packaging bag are heat-sealed and one side is open. |
High-Pressure Test | The test pressure can reach up to 1.6 MPa. |
Anti-theft Bottle Cap | It is suitable for the sealing performance test of various anti-theft bottle caps. Anti-theft bottle caps can include cola bottle caps, mineral water purified water bottle caps, beverage bottle caps, vegetable oil barrel caps, non-staple food condiment caps (soy sauce, vinegar, cooking wine, etc.), easy-open three-piece cans (beer, beverage cans, etc.) , paper packaging cans (cylindrical, various potato chips and shrimp crackers), etc. |
Downloads
Get in touch to discuss your requirements